Step 4-Remove the header rail seal"Weather Stripping".
Note:The old spongy foam rubber type may tear,due to age or was gluded, and will need to be replaced with a new all rubber seal.This will make a much better seal.
Note:The old spongy foam rubber type may tear,due to age or was gluded, and will need to be replaced with a new all rubber seal.This will make a much better seal.
Step 5-Drill out the rivets from the retainer rail that holds the weather stripping seal.Set aside next to your anchor bar.
Step 6-Remove the six screws from the pad that fasten the frame to the header rail.These screws hold the top to the head rail.
Step 7-Peel the old top off the head rail.
